HP BladeSystem 2530-24G-PoE+

Manufacturer :
HP
MPN :
J9773A
Condition :
New Retail
Availability:
3 In Stock
£579.93 ex Vat £695.92 inc Vat

Next Day

HP BladeSystem 2530-24G-PoE+

Double click on above image to view full picture

Zoom Out
Zoom In
  • Management features
    Web-based management
    Using a website/web application to manage something.
    Yes
    Ports & interfaces
    Basic switching RJ-45 Ethernet ports quantity*
    The number of basic switching RJ-45 Ethernet ports (sockets).
    28 24 28
    SFP/SFP+ slots quantity
    4
    Networking
    Networking standards*
    The way in which the network is working e.g. IEEE 802.11a IEEE 802.11b IEEE 802.11g.
    IEEE 802.1D IEEE 802.1p IEEE 802.1Q IEEE 802.1s IEEE 802.1w IEEE 802.3 IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3az IEEE 802.3u IEEE 802.3x
    Full duplex
    A full-duplex system allows communication in both directions and unlike half-duplex allows this to happen simultaneously.
    Yes
    10G support*
    The product can use Oracle 10G which is a database management system introduced in 2003.
    Yes
    Flow control support
    Yes
    Auto MDI/MDI-X
    A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
    Yes
    Link aggregation
    Yes
    Spanning tree protocol
    Yes
    Data transmission
    Supported data transfer rates
    Rates at which data can be transferred. May vary according to network configurations.
    10/100/1000 Mbps
    Switching capacity*
    The data transfer capacity of the switch per second.
    56 Gbit/s
    Throughput
    41600000 Mpps
    Maximum data transfer rate
    1 Gbit/s
    Optical fiber
    Fiber optic connector
    This terminates the end of an optical fiber and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
    SFP
    Protocols
    Management protocols
    LLDP SNMP LLDP-MED SNMPv1/v2c/v3
    Design
    Rack mounting*
    The type of mounting that can position devices in a shelving system (rack).
    Yes
    Colour of product*
    The colour e.g. red blue green black white.
    Black
    Form factor
    The shape or design of the product.
    19U
    LED indicators
    Yes
    Safety
    List of regulatory safety standards for all countries in which this product has been certified.
    CAN/CSA EN UL
    Certification
    FCC EN VCCI
    Performance
    Built-in processor
    ARM9E
    Processor frequency
    The clock rate is the fundamental rate in cycles per second (measured in hertz) at which a computer performs its most basic operations such as adding two numbers. There are more factors like internal memory size that influence a computer's actual response time.
    800 MHz
    Packet buffer memory
    3 MB
    Noise level
    The amplitude level of the undesired background noise usually measured in decibels (db).
    43 9 dB
    Memory type
    Type of memory in the device e.g. DDR3 SRAM (Static RAM).
    DDR3
    Internal memory
    The amount of memory usually measured in bytes (e.g. MB GB) which is installed in the system's hardware.
    128 MB
    Flash memory
    128 MB
    Power
    AC input frequency
    50/60 Hz
    Power consumption (typical) *
    Amount of power consumed by this model often expressed in watts (W). Typical values that manufacturers give are power consumption when off standby/suspended mode typical use maximum usage.
    247 W
    Input current
    3 2 A
    Power over Ethernet (PoE)
    Power over Ethernet (PoE) support *
    The device supports Power over Ethernet (PoE) which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
    Yes
    Operational conditions
    Operating temperature (T-T)
    The minimum and maximum temperatures at which the product can be safely operated.
    0 - 45 °C
    Operating relative humidity (H-H)
    15 - 95 %
    Operating altitude
    0 - 3000 m
    Weight & dimensions
    Width
    The measurement or extent of something from side to side.
    44 3 cm
    Depth
    The distance from the front to the back of something.
    33 cm
    Height
    The measurement of the product from head to foot or from base to top.
    4 4 cm
    Weight
    Weight of the product without packaging (net weight). If possible the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
    4 kg
    Other features
    Latency
    Latency is the time needed to forward a packet of data.
    2.3 µs
    Connectivity technology
    Wired
    Ethernet interface type
    Fast Gigabit
    Ethernet LAN data rates
    The different speed levels of the Ethernet LAN connection.
    10 100 1000 Mbit/s
    Ethernet LAN
    An Ethernet LAN (Local Area Network) interface is present for a wired conection via a cable.
    Yes
    Networking features
    Gigabit ethernet
  • Hewlett Packard Enterprise 2530-24G-PoE+ BladeSystem 28 24 28 10/100/1000 Mbps 56 Gbit/s 41600000 Mpps SFP LLDP SNMP LLDP-MED SNMPv1/v2c/v3