HP 2920-24G-POE+ Switch

Manufacturer :
Condition :
New Retail
6 In Stock
£1,269.25 ex Vat £1,523.10 inc Vat

Next Day

HP 2920-24G-POE+ Switch

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Management features
    Switch layer*
    A network switch is a computer networking device that links networking segments. A switch has different layers such as layer 2 (a network bridge operating at the data link layer interconnecting a small number of devices) and layer 4 (can act as a firewall amongst other things).
    Switch type*
    What switch device has managed or unmanaged.
    Quality of Service (QoS) support
    Multicast support
    Web-based management
    Using a website/web application to manage something.
    Ports & interfaces
    Basic switching RJ-45 Ethernet ports quantity*
    The number of basic switching RJ-45 Ethernet ports (sockets).
    Basic switching RJ-45 Ethernet ports type*
    The type/category of basic switching RJ-45 Ethernet ports (sockets).
    Gigabit Ethernet (10/100/1000)
    Networking standards*
    The way in which the network is working e.g. IEEE 802.11a IEEE 802.11b IEEE 802.11g.
    IEEE 802.3 IEEE 802.3ab IEEE 802.3at IEEE 802.3u
    Full duplex
    A full-duplex system allows communication in both directions and unlike half-duplex allows this to happen simultaneously.
    Spanning tree protocol
    Routing entries
    VLAN support
    A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings but form one LAN on a logical level.
    Auto MDI/MDI-X
    A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
    Rate limiting
    Flow control support
    IGMP snooping
    Link aggregation
    DHCP server
    A server is a system which that responds to requests across a computer network to provide or help to provide a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol) which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval after which the computer must renew the IP address or acquire a new one.
    DHCP client
    Data transmission
    MAC address table*
    The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
    16000 entries
    Switching capacity*
    The data transfer capacity of the switch per second.
    128 Gbit/s
    95 2 Mpps
    SSH/SSL support
    Access Control List (ACL)
    Rack mounting *
    The type of mounting that can position devices in a shelving system (rack).
    Colour of product *
    The colour e.g. red blue green black white.
    Form factor
    The shape or design of the product.
    Stackable *
    Devices can be placed on top of each other.
    Built-in processor
    Processor frequency
    The clock rate is the fundamental rate in cycles per second (measured in hertz) at which a computer performs its most basic operations such as adding two numbers. There are more factors like internal memory size that influence a computer's actual response time.
    625 MHz
    Flash memory
    1024 MB
    Memory type
    Type of memory in the device e.g. DDR3 SRAM (Static RAM).
    Internal memory
    The amount of memory usually measured in bytes (e.g. MB GB) which is installed in the system's hardware.
    512 MB
    AC input voltage
    The voltage of the AC electricity that is inpitted into the product.
    100-240 V
    AC input frequency
    50/60 Hz
    Power consumption (typical) *
    Amount of power consumed by this model often expressed in watts (W). Typical values that manufacturers give are power consumption when off standby/suspended mode typical use maximum usage.
    475 W
    Power over Ethernet (PoE)
    Power over Ethernet (PoE) support *
    The device supports Power over Ethernet (PoE) which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
    Total Power over Ethernet (PoE) budget
    370 W
    Operational conditions
    Heat dissipation
    The heat generated by the power supply.
    358 BTU/h
    Weight & dimensions
    The measurement or extent of something from side to side.
    44 25 cm
    The distance from the front to the back of something.
    33 6 cm
    The measurement of the product from head to foot or from base to top.
    4 45 cm
    Weight of the product without packaging (net weight). If possible the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
    5 5 kg
  • Hewlett Packard Enterprise 2920-24G-POE+ L3 Managed Gigabit Ethernet (10/100/1000) IEEE 802.3 IEEE 802.3ab IEEE 802.3at IEEE 802.3u 16000 entries 128 Gbit/s